JA-111H TRB Bus module interface for wire detector

The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with a power supply.

JA-111H TRB Bus module interface for wire detector

This built-in module can be directly integrated into the detector.

One input of the module has a fixed Tamper signal, the second input reports an alarm signal and the third input is used to report a fault of a connected device or to report a special “Masking” signal (for detectors with an Anti-masking function).
The module can also be used for the connection of a CT-01 roller blind detector.
The module can be used to control programmable PG outputs.
It supports setting of a minimum activation time for alarm triggering (0.1 s – 300 s).
The detector features status as well as impulse activation.
The module is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system.

Technical specifications

Compatible with	F-Link 1.4.0 or higher
Power	via the control panel bus 12 V (9 – 15 V)
Backup (idle) mode consumption	5 mA consumption of the control device
Current consumption for cable selection	12 mA consumption of the control device
Maximum acceptable load by the connected control	50 mA
Dimensions	16 x 30 x 12 mm
Classification	security level 2 / environment class II
In accordance with	EN 50131-1, EN 50131-3 (ACE type B)
Operating temperature range	-10 to 40 °C
It also meets the requirements of	EN 50130-4, EN 55022