JA-111H-AD TRB Bus module for system control

The JA-111H-AD TRB is designed for the connection of any control device (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with a power supply from the control panel bus.

JA-111H-AD TRB Bus module for system control

This built-in module can be directly integrated into the control device.

One input of the module has a fixed Tamper signal, several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed “Unset” signal.

The module can be used to control programmable PG outputs.
It allows you to set a minimum activation time for the controller (0.1 s – 300 s).
The detector features impulse activation for dual-conductor control as well as status control for single-conductor control.
The module is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.

Technical specifications

Compatible with	F-Link 1.4.0 or higher
Power	via the control panel bus 12 V (9 – 15 V)
Backup (idle) mode consumption	5 mA consumption of the control device
Current consumption for cable selection	12 mA consumption of the control device
Maximum acceptable load by the connected controller	50 mA
Dimensions	16 x 30 x 12 mm
Classification	security level 2 / environment class II
In accordance with	EN 50131-1, EN 50131-3 (ACE type B)
Operating temperature range	-10 to 40 °C
It also meets the requirements of	EN 50130-4, EN 55022