Roll over image to zoom in
Click to open expanded view
JA-111H-AD TRB Bus module for system control
SKU: JA-111H-AD TRB
The JA-111H-AD TRB is designed for the connection of any control device (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with a power supply from the control panel bus.
JA-111H-AD TRB Bus module for system control
This built-in module can be directly integrated into the control device.
One input of the module has a fixed Tamper signal, several set signals can be selected for the second input and the third input serves either to report a fault of the connected device, or it can be used as the second control conductor with a fixed “Unset” signal.
- The module can be used to control programmable PG outputs.
- It allows you to set a minimum activation time for the controller (0.1 s – 300 s).
- The detector features impulse activation for dual-conductor control as well as status control for single-conductor control.
- The module is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.
Technical specifications
Compatible with | F-Link 1.4.0 or higher |
---|---|
Power | via the control panel bus 12 V (9 – 15 V) |
Backup (idle) mode consumption | 5 mA consumption of the control device |
Current consumption for cable selection | 12 mA consumption of the control device |
Maximum acceptable load by the connected controller | 50 mA |
Dimensions | 16 x 30 x 12 mm |
Classification | security level 2 / environment class II |
In accordance with | EN 50131-1, EN 50131-3 (ACE type B) |
Operating temperature range | -10 to 40 °C |
It also meets the requirements of | EN 50130-4, EN 55022 |
Brand
Be the first to review “JA-111H-AD TRB Bus module for system control” Cancel reply
Reviews
There are no reviews yet.