AC-160-C Wireless Multifunctional Power Relay
Share To:
The wireless multifunctional power relay is a component of the JABLOTRON 100 system. Enrolled to the control panel, the relay copies selected PG outputs.
AC-160-C Mounting-box-fitted wireless multifunctional power relay
The relay can also be installed as an autonomous device responding to the activation of unidirectional wireless detectors of the JA-15x series. In this case, the relay triggers according to the mode selected for the particular detector (5 selectable modes: extended copy, impulse, change status, switch off and block). It provides a switching relay with galvanic safety separation for switching 230V/16A power loads. In the system it occupies one position.
Technical specifications
Rated supply voltage | 100-230 V, 50-60 Hz |
---|---|
Internal power consumption at 230V AC (min / max) | 0.2 W / 0.7 W |
Operating frequency | 868.1 MHz, Jablotron protocol |
Antenna | internal |
Contact load capacity – protection class II | Max. switched voltage 250 V AC
Resistance load (cosφ=1) max. 16 A Inductive, capacitive load (cosφ=0.4) max. 8 A Halogen lighting max. 1000 W Minimum switched DC power 0.5 W |
Diameter of connected conductors | max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2 |
Ingress protection class | IP20 |
Dimensions | 49 x 49 x 26 mm |
Operating temperature range | -10 °C to 40 °C, RH 75% non-condensing |
In conformity with | ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1 |
Operating conditions | ERC REC 70-03 |
Reviews
There are no reviews yet.